Tuesday , August 21st 2018
    Find The Network Attached Storage You Need

MakerFocus 4pcs 3.7V Lithium Rechargable Battery, 802540 3.7V 1000mAh Battery with Protection Board Insulated Rubber Tape Matched with ESP32 Development Board WIFI Kit for Arduino Nodemcu

Product Features:

    4pcs 3.7V Lithium Rechargable Battery, 802540 3.7V 1000mAh Battery with Protection Board andamp; Insulated Rubber Tape Matched with ESP32 Development Board WIFI Kits for Arduino NodemcuFeatures:1. Note: The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or…
Price as on: 2018-06-12 23:44:51
17.99  

Product Description

4pcs 3.7V Lithium Rechargable Battery, 802540 3.7V 1000mAh Battery with Protection Board andamp; Insulated Rubber Tape Matched with ESP32 Development Board WIFI Kits for Arduino Nodemcu

Features:
1. Note: The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.
2. This product interface is 1.25 pitch male, it can be matched with ESP32 Development Board WIFI Kits for Arduino Nodemcu.

Specification:
Standard Voltage: 3.7V
Rated Capacity: 1000mAh
Weight: About 17g
Working Current: 1.5A
Overcurrent protection: 2~3A
Overcharge limit pressure: 4.25±0.05V
Over-voltage limit pressure: 2.45±0.30V

Standard Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it’s charging current≤ 0.05C.
Charge current time: Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours).
The maximum charging current: 0.5C
Continuous Dishcarge Current: 0.5C
The maximum discharge current: 1C
End-off voltage: 2.75V/pcs
Allowable charging temperature: 0℃ ~ +45 ℃
Allowable discharge temperature: -10 ~ +60 ℃
Allowable storage temperature: -10 ~ +40 ℃( within 3 months); -10 ~ +30 ℃ ( within 6 months).

Package Including
4 * 1000mAh 802540 3.7V Lithium Rechargable Battery

Product Features

  • [Note1]: After some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don’t need to switch the polarity of the two wires. Thanks a ton for every customer’s suggestion and support.
  • [Note2]:The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.
  • [Usage]:This product interface is 1.25 pitch male, it can be matched with ESP32 Development Board WIFI Kits for Arduino Nodemcu.
  • [Standard Charging Method]:Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it’s charging current≤ 0.05C. Working Current: 1.5A
  • [Charge current time]:Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours).